High pressure sterilizer, also known as High pressure steam sterilizer,can be divided into portable sterilizers and vertical autoclaves.A device that uses heated wire to heat water to produce steam and maintain a certain pressure.There is mainly a barrel that can be sealed,a pressure gauge,an exhaust valve,a safety valve,and a heating wire.
It is suitable for medical and health undertakings,scientific research,agriculture and other units. It is an ideal equipment for disinfecting medical equipment, dressings,glassware, and solution medium.Portable autoclave is the necessary inspection equipment for QS and HACCP certification for food factories and drinking water plants.
Microcomputer intelligent automatic control,control sterilization pressure,temperature,time; over-temperature automatic protection:exceeds the set temperature, automatically cut off the heating power;door safety interlocking device:the inner cavity is under pressure,the door cover can not be opened,the patent device Low water level alarm:Automatically cut off the power supply when the water is lacking,sound and light alarm,imported water detection device;leakage protection: configuration of leakage protection device;temperature dynamic digital display,end of sterilization end signal;temperature rise, sterilization,exhaust,The drying process is automatically controlled without manual supervision;mode one:heating-sterilizing exhausting steam;mode two:heating sterilizing pulse exhausting;mode three:heating sterilizing no steaming,mode four:custom.
How to use autoclave
1 Add an appropriate amount of water to the outer layer and place the items to be sterilized into the inner layer,cover the lid and twist the screw symmetrically.
2 The steam is generated in the heating device.When the gauge pointer reaches 33.78kPa,open the exhaust valve to discharge the cold air.At this time,the gauge pointer drops.When the pointer drops to zero,the exhaust valve is closed.
3 Continue to heat,the steam in the device increases,the pointer of the pressure gauge rises again,when the pressure in the device increases to the required pressure,the firepower is reduced, and according to the characteristics of the sterilized articles,the vapor pressure is maintained for the required pressure for a certain time, then Power off or ignite the sterilizer,let it cool naturally,then slowly open the exhaust valve to eliminate the residual gas before opening the cover
Sterilizer use precautions
a The items to be sterilized should not be placed too tightly;b The cold air must be completely removed,otherwise the temperature inside the device will not reach the specified temperature,which will affect the sterilization effect;c After the sterilization is completed,the gas can not be decompressed,otherwise the liquid in the bottle It will violently boil,flushing the stopper and overflowing and even causing the container to burst.It is necessary to open the lid after the pressure in the sterilizer has fallen to the same level as the atmospheric pressure;d.There is a high-pressure steam sterilizer that is automatically controlled by the microcomputer.After the air conditioner is discharged,the instrument can automatically press the constant pressure timing.Automatically cut off the power and whistle,it is very convenient to use.
Henan Sanqiang Medical Equipment Liability Co.,Ltd has successfully developed low temperature plasma hydrogen peroxide sterilizer,ethylene oxide sterilizer,dry heat fast sterilizer,moist heat fast sterilizer,Wet heat steam sterilizer,endoscope storage cabinet,ultrasonic cleaning machine,endoscope cleaning center And other series of products and related supplies.
https://www.facebook.com/zhanjie.wang.359
https://twitter.com/SanqiangMedical
http://www.linkedin.com/company/13688847/admin/updates/
http://www.sterilizers-china.com/
wang@sterilizers-china.com 86- 13837222611 ZhanJie Wang
